"Autoclave" is a very important component in aerated concrete equipment.

If you are engaged in the research and development of aerated concrete equipment or the use of it to produce concrete will know that this production line is composed of many equipment, without that equipment then can not complete the entire workflow, today to everyone said the most important component equipment "autoclave".

 

The autoclave door of the aerated concrete equipment designed by Shandong Sunshine Zhongtai is sealed by rubber ring, but the pressure between the autoclave door and rubber ring does not indicate that the autoclave door is completely sealed. If the pressure vessel autoclave has a certain amount of steam, it also shows that the steam in the kettle did not run out, steam advantage is a seamless, seamless drilling gas, so the rubber ring must be expanded to achieve sealing effect. Therefore, the design of the rubber ring of the kettle door is to use the inner and outer rubber rings. The cross-section shape of the rubber ring is different, and their respective roles are also very different. The shape of the outer ring section is concave and flat, the shape of the inner ring section is concave and convex, and the triangular groove of the inner ring is used to fill the space where the steam makes the rubber ring expand. The convex part of the outer end and the groove of the outer ring are tightly sleeved, and the outer ring is flat. After installation, it is flat with the plane after the kettle door is pressed. The valve ring is used for filling the rubber ring of the kettle ring into the steam valve, and the valve is a globe valve. When the kettle door is closed, the rubber ring must be filled with steam before steaming the brick, closing valve 3, opening valve 1 and valve 2, slowly feeding steam into the inner ring of the kettle door, then slowly enlarging a little so that it gradually expands sufficiently. At constant temperature, instead of using steam from the boiler to fill the rubber ring, the rubber ring is filled with steam from the kettle. At this time, the valve 1 is closed, and then the valve 3 is opened, so that the inside and outside of the rubber ring (inside and outside of the inner ring) always maintain the same steam pressure, so as to achieve the force balance to protect the rubber ring in a stable expansion stage.

 

After reading the above description, I feel very confused, because after all, I am not familiar with this industry. In short, from each of the above I can see that Shandong Sunshine Zhongtai in the design of aerated concrete equipment in the autoclave carefully, but also let it appear as an important part of the aerated concrete equipment.

 

Aerated concrete equipment manufacturer: Changzhou Mingjie Building Materials Equipment Manufacturing Co., Ltd. - with more than 30 years of mechanical equipment manufacturing experience. With rich experience in mechanical processing, strong economic strength and solid technical foundation, Mingjie has been in a leading position in the aerated concrete equipment manufacturing industry. Tel: 0086-519-68880158